This high-performance polycarbonate sheet is engineered with a specialized lubricating additive, significantly reducing friction and wear. Ideal for sliding components and environments requiring smooth, consistent motion with enhanced durability.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.093" |
| Length | 14" |
| Width | 17" |
Precision-manufactured to tight tolerances, this 0.093-inch thick polycarbonate sheet measures 14 inches by 17 inches. The integral lubricating properties of the material, achieved through an advanced additive process, provide a low coefficient of friction, excellent wear resistance, and inherent impact strength. This makes it suitable for demanding applications where reduced surface friction and extended service life are critical, such as wear strips, slide guides, and low-friction bearing surfaces. Its excellent clarity and machinability further enhance its versatility in custom component fabrication.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Accurately measure and cut the polycarbonate sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using suitable fasteners, ensuring even pressure distribution to avoid stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate where low friction is required. | Specify and use this lubricating grade polycarbonate for applications demanding reduced friction and wear. |
| Over-tightening fasteners, leading to stress cracking. | Use appropriate washers and avoid excessive torque when securing the sheet. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Wear strips and guides, Low-friction slides and runners, Protective covers for moving parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||