This 0.088-inch thick polycarbonate sheet, measuring 43" x 23", is engineered with integrated lubricating properties. Ideal for applications requiring low friction and enhanced wear resistance, ensuring smooth operation and extended component life.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.088" |
| Length | 43" |
| Width | 23" |
Precision-manufactured to tight tolerances, this 0.088" thick polycarbonate stock sheet offers a superior combination of impact strength and lubricity. The material's inherent self-lubricating properties minimize friction and wear, making it suitable for high-cycle components and sliding surfaces in various industrial settings. Its excellent dimensional stability (43" x 23") ensures consistent performance under varying operational conditions and temperatures, reducing the need for external lubricants and minimizing maintenance downtime.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-determined mounting points or cut lines. 3. Secure the sheet using appropriate mechanical fasteners, ensuring even pressure distribution to avoid stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracking. | Use washers and avoid overtightening; allow for thermal expansion and contraction. |
| Using abrasive cleaning agents that can scratch the surface. | Clean with a mild soap and water solution, followed by a soft cloth. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction sliding mechanisms, Wear strips and guide rails, Conveyor system components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||