This polycarbonate stock sheet, specifically formulated for lubricating applications, offers exceptional impact resistance and a low coefficient of friction. Its precise dimensions ensure seamless integration into various industrial setups.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.024" |
| Length | 34" |
| Width | 28" |
Specified by design engineers worldwide, this 0.024" thick polycarbonate sheet provides a robust and wear-resistant solution for high-performance lubricating applications. Measuring 34" in length and 28" in width, its inherent material properties, including excellent tensile strength and dimensional stability, make it ideal for components requiring reduced friction and extended service life. The material's chemical resistance further enhances its utility in harsh environments, ensuring consistent performance under demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface where the sheet will be applied is clean, dry, and free from debris. 2. Carefully position the polycarbonate sheet according to the design specifications, noting any required orientation. 3. Secure the sheet using appropriate mechanical fasteners or adhesives, ensuring even pressure distribution to prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate in high-friction environments. | Select lubricating grade polycarbonate to ensure optimal performance and longevity. |
| Over-tightening fasteners, leading to stress cracking. | Use washers and avoid overtightening; allow for thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction sliding components, Wear strips and guides, Bearing surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||