This Schedule 80 polycarbonate seamless pipe offers exceptional impact resistance and optical clarity. Its robust construction ensures reliable performance in demanding fluid handling and structural applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 5.2" |
| Outside Diameter | 3.643" |
| Wall Thickness | 0.185" |
Specified by design engineers worldwide, this polycarbonate seamless pipe conforms to stringent Schedule 80 dimensional standards. The 5.2" nominal pipe size, with a precise 3.643" outside diameter and a robust 0.185" wall thickness, provides superior pressure handling capabilities. Polycarbonate's inherent properties, including high tensile strength, excellent impact toughness even at low temperatures, and good chemical resistance to many acids, alkalis, and salts, make it ideal for critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate solvent cement for polycarbonate to both the pipe end and the fitting socket. 3. Insert the pipe into the fitting with a quarter-turn twist to distribute cement evenly, holding for 30 seconds to set.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for polycarbonate. | Always use a solvent cement specifically formulated for polycarbonate to ensure a strong, leak-proof bond. |
| Insufficient curing time before pressurizing the system. | Allow adequate curing time as per the solvent cement manufacturer's recommendations before introducing fluid or pressure. |
A: This Seamless Pipe, Schedule 80 is manufactured from Polycarbonate.
A: High-pressure fluid transfer systems, Sight glasses and visual inspection ports, Protective guarding and enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||