Engineered for demanding environments, this Schedule 160 polycarbonate seamless pipe offers exceptional impact strength, clarity, and broad chemical resistance. Ideal for robust fluid handling and structural support in critical industrial settings.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 2.6" |
| Outside Diameter | 3.884" |
| Wall Thickness | 0.180" |
Purpose-built for heavy-duty applications, this seamless polycarbonate pipe features a 2.6" nominal inside diameter and a precise 3.884" outside diameter, yielding a substantial 0.180" wall thickness conforming to Schedule 160 specifications. Polycarbonate's inherent high impact resistance, excellent optical clarity, and resistance to many acids, bases, and oils make it suitable for applications requiring visual monitoring and durability under stress. Its wide operating temperature range further enhances its versatility in challenging industrial processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Carefully align pipe ends and apply appropriate solvent cement or mechanical joining method as per manufacturer guidelines. 3. Allow adequate cure time before introducing pressure or load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible solvent cements which can degrade polycarbonate. | Consult the polycarbonate manufacturer's recommendations for approved solvent cements or joining procedures. |
| Exceeding the maximum rated pressure or temperature for polycarbonate. | Always verify the operating parameters against the material's specifications and application requirements. |
A: This Seamless Pipe, Schedule 160 is manufactured from Polycarbonate.
A: High-pressure fluid transfer systems, Sight glasses and visual inspection ports, Pneumatic conveying systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||