This Schedule 160 seamless polycarbonate pipe offers exceptional clarity, impact strength, and chemical resistance. Engineered for high-pressure fluid transfer and demanding environments where visibility and durability are paramount.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 0.9" |
| Outside Diameter | 1.361" |
| Wall Thickness | 0.126" |
Built to exacting engineering tolerances, this polycarbonate seamless pipe features a 0.9-inch nominal inside diameter and a precise 1.361-inch outside diameter, resulting in a robust 0.126-inch wall thickness for Schedule 160 integrity. Polycarbonate's inherent high tensile strength, excellent impact resistance even at low temperatures, and remarkable clarity make it suitable for applications requiring visual monitoring of fluid flow. Its broad chemical resistance profile ensures longevity in corrosive environments. Operating temperature range typically -40°F to 250°F (-40°C to 121°C), depending on pressure and chemical exposure. Pressure ratings vary with temperature and fluid type, consult manufacturer data for precise load calculations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Apply appropriate solvent cement specifically formulated for polycarbonate, adhering to its curing time. 3. Assemble pipe sections with a slight twist to ensure even cement distribution, holding firmly until initial set is achieved.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement not rated for polycarbonate. | Always use a solvent cement specifically designed and recommended for polycarbonate to ensure proper bonding and avoid material degradation. |
| Over-tightening fittings, causing stress cracks. | Hand-tighten fittings as much as possible, then use a wrench for only a quarter to half turn to avoid excessive stress on the pipe material. |
A: This Seamless Pipe, Schedule 160 is manufactured from Polycarbonate.
A: High-clarity fluid transfer systems, Industrial sight glasses and flow indicators, Pneumatic conveying systems requiring impact resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||