This Schedule 80 seamless polycarbonate pipe offers exceptional strength and clarity. Its robust construction and high impact resistance make it ideal for challenging environments where reliability is paramount.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 4.7" |
| Outside Diameter | 6.310" |
| Wall Thickness | 0.226" |
Engineered for reliability and performance, this 4.7-inch nominal size, Schedule 80 seamless pipe is manufactured from high-grade polycarbonate. It features a precise outside diameter of 6.310 inches and a substantial wall thickness of 0.226 inches, ensuring superior pressure handling capabilities and structural integrity. Polycarbonate's inherent properties of excellent impact strength, transparency, and chemical resistance at moderate temperatures allow for its use in diverse fluid handling and visual monitoring systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement and primer for polycarbonate pipe. 3. Fit pipe into fitting with a slight twist to spread cement evenly, holding for 30 seconds to set.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement not rated for polycarbonate. | Always use a solvent cement specifically formulated for polycarbonate to ensure a strong, permanent bond. |
| Applying excessive force during assembly, potentially cracking the pipe. | Assemble with firm, but not excessive, pressure to avoid stress cracking. Follow manufacturer's torque recommendations if applicable. |
A: This Seamless Pipe, Schedule 80 is manufactured from Polycarbonate.
A: High-pressure fluid transfer systems, Visual monitoring of processes, Pneumatic conveying systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||