This robust Schedule 80 seamless polycarbonate pipe offers exceptional clarity, superior impact strength, and excellent chemical resistance. Engineered for high-pressure applications where visibility and durability are paramount.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 4.5" |
| Outside Diameter | 1.165" |
| Wall Thickness | 0.256" |
Manufactured under strict quality controls, this 4.5" OD seamless pipe features a 1.165" inside diameter and a substantial 0.256" wall thickness, conforming to Schedule 80 specifications. Constructed from high-performance polycarbonate, it provides outstanding optical clarity and exceptional impact resistance, even at low temperatures. Its inherent chemical inertness makes it suitable for a wide range of corrosive environments and fluid handling systems. The seamless design ensures uniform strength and eliminates potential leak paths.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Utilize appropriate solvent cement and primer specifically designed for polycarbonate. 3. Apply cement evenly to both joining surfaces and assemble with a slight twist, holding firmly until set.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for polycarbonate. | Always use a solvent cement explicitly formulated and recommended for polycarbonate to ensure a strong, reliable bond. |
| Over-tightening fittings, which can stress the pipe. | Hand-tighten fittings and then apply a minimal additional turn with a wrench, avoiding excessive force that could cause cracking. |
A: This Seamless Pipe, Schedule 80 is manufactured from Polycarbonate.
A: Sight Flow Indicators, High-Pressure Fluid Transfer, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||