This 4.5" OD, Schedule 80 polycarbonate seamless pipe offers exceptional clarity, impact resistance, and a broad temperature range. Ideal for demanding fluid handling and structural applications requiring visibility.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 4.5" |
| Outside Diameter | 4.467" |
| Wall Thickness | 0.387" |
Engineered for reliability and performance, this 4.5" Schedule 80 seamless pipe is manufactured from high-grade polycarbonate, offering superior impact strength and transparency. With an outside diameter of 4.467" and a robust wall thickness of 0.387", it provides excellent pressure handling capabilities. Polycarbonate's inherent properties include high tensile strength, good chemical resistance to many common industrial fluids, and excellent thermal insulation. This makes it suitable for applications in chemical processing, food and beverage, medical equipment, and sight glass installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces and sealing components are clean and free from debris. 2. Apply appropriate solvent cement or mechanical joint sealant as recommended for polycarbonate. 3. Carefully align and insert the pipe into the fitting, maintaining consistent pressure until the cement sets or the joint is secured.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible solvent cements or sealants not rated for polycarbonate. | Always consult the material compatibility chart for polycarbonate and use only approved adhesives or sealants to prevent material degradation. |
| Over-tightening mechanical fittings, leading to stress cracking. | Follow manufacturer torque specifications for mechanical fittings to avoid excessive stress on the pipe wall. |
A: This Seamless Pipe, Schedule 80 is manufactured from Polycarbonate.
A: Sight glasses and visual inspection systems, Chemical fluid transfer lines, Food and beverage processing equipment, Medical device components, Pneumatic conveying systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||