This robust Polycarbonate Schedule 80 seamless pipe offers exceptional impact strength and optical clarity. Engineered for high-pressure environments, it ensures reliable performance in demanding industrial and commercial applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 4.4" |
| Outside Diameter | 1.678" |
| Wall Thickness | 0.266" |
Manufactured under strict quality controls, this 4.4" nominal size, Schedule 80 seamless polycarbonate pipe features a precise 1.678" outside diameter and a substantial 0.266" wall thickness. Polycarbonate's inherent properties provide superior impact resistance, high tensile strength, and excellent transparency, making it suitable for applications requiring visual monitoring or resistance to extreme forces. Its chemical inertness ensures compatibility with a wide range of fluids and environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, deburred, and free of damage. 2. Apply appropriate solvent cement specifically designed for polycarbonate to both the pipe end and fitting socket. 3. Insert pipe into fitting with a slight twisting motion until it bottoms out, holding for 30 seconds to prevent slippage. 4. Remove excess cement and allow adequate cure time before pressurizing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement not rated for polycarbonate. | Always use a solvent cement explicitly formulated for polycarbonate to ensure proper bonding and material integrity. |
| Insufficient holding time after assembly, leading to joint failure. | Hold the assembled joint firmly for at least 30 seconds to allow the cement to begin setting before releasing. |
A: This Seamless Pipe, Schedule 80 is manufactured from Polycarbonate.
A: High-impact fluid transfer systems, Visual monitoring of processes, Protective conduits for sensitive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||