This robust, Schedule 80 seamless polycarbonate pipe offers exceptional clarity, impact resistance, and a broad temperature range, making it ideal for demanding industrial and laboratory fluid handling systems.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 3.9" |
| Outside Diameter | 4.718" |
| Wall Thickness | 0.318" |
Specified by design engineers worldwide, this 3.9" IPS (4.718" OD, 0.318" WT) Schedule 80 polycarbonate seamless pipe provides superior transparency and excellent impact strength for critical applications. Its high tensile strength and resistance to a wide range of chemicals, coupled with its inherent toughness, ensure reliable performance in environments requiring both visual monitoring and structural integrity. Operating temperature range is -100°F to 250°F, with a working pressure rating of 500 psi at 73°F.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean, dry, and free from damage. 2. Apply appropriate solvent cement specifically formulated for polycarbonate to both the pipe end and the fitting socket. 3. Insert the pipe into the fitting with a slight twisting motion, holding for 30 seconds to prevent slippage. 4. Remove excess cement immediately with a clean cloth.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a solvent cement not designed for polycarbonate. | Always use a high-quality solvent cement specifically formulated for polycarbonate to ensure a strong, leak-proof bond. |
| Insufficient curing time before pressure testing. | Allow the solvent-cemented joints to cure for the manufacturer-recommended minimum time (typically 24 hours) before subjecting the system to pressure. |
A: This Seamless Pipe, Schedule 80 is manufactured from Polycarbonate.
A: Chemical processing and transfer lines, Laboratory and pharmaceutical fluid systems, Sight glasses and flow monitoring, Pneumatic conveying systems, High-impact protective conduits.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||