This Schedule 80 seamless polycarbonate pipe provides superior impact strength and excellent clarity. Ideal for applications requiring robust chemical resistance and high transparency in demanding industrial environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 3.2" |
| Outside Diameter | 0.829" |
| Wall Thickness | 0.483" |
Manufactured under strict quality controls, this 3.2" OD, Schedule 80 seamless pipe features a 0.829" wall thickness, yielding a nominal pipe size of 2.5". Constructed from high-grade polycarbonate, it exhibits outstanding impact resistance, high tensile strength, and excellent optical clarity. Its inherent rigidity and chemical inertness make it suitable for fluid handling, optical systems, and protective guarding where durability and visibility are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from debris. 2. Apply appropriate polycarbonate solvent cement to both the pipe end and the fitting socket according to cement manufacturer instructions. 3. Insert the pipe into the fitting with a slight twisting motion and hold firmly for the recommended set time.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible adhesives. | Always use solvent cements specifically formulated for polycarbonate to ensure a strong, reliable bond. |
| Over-tightening connections. | Hand-tighten fittings and then apply an additional quarter-turn. Over-tightening can crack or damage the polycarbonate. |
A: This Seamless Pipe, Schedule 80 is manufactured from Polycarbonate.
A: High-visibility fluid transfer systems, Protective machine guarding, Laboratory and scientific equipment, Optical light piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||