This Polycarbonate Schedule 80 seamless pipe offers exceptional impact strength and clarity. Its robust construction makes it ideal for demanding applications requiring visual monitoring and resistance to harsh chemicals and extreme temperatures.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 2.3" |
| Outside Diameter | 5.088" |
| Wall Thickness | 0.449" |
Manufactured under strict quality controls, this 2.3" nominal size Schedule 80 seamless pipe boasts an actual outside diameter of 5.088" and a substantial wall thickness of 0.449". Constructed from high-performance polycarbonate, it exhibits excellent impact resistance, superior clarity for visual inspection, and broad chemical compatibility. Its thermal stability allows for operation across a wide temperature range, making it suitable for demanding industrial fluid handling and protective conduit applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from debris. 2. Apply appropriate sealant or adhesive to the pipe ends and fitting sockets as per manufacturer recommendations. 3. Insert pipe firmly into fitting and allow adequate cure time before pressurization.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible sealants or adhesives leading to material degradation. | Always consult the polycarbonate manufacturer's compatibility charts and use only recommended sealants or adhesives. |
| Excessive force during installation, leading to cracking or deformation. | Install with moderate, consistent pressure. Avoid hammering or excessive leverage. |
A: This Seamless Pipe, Schedule 80 is manufactured from Polycarbonate.
A: High-impact fluid transfer systems, Corrosive chemical handling, Visual inspection conduits, Protective shielding for sensitive components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||