This high-performance Polycarbonate Schedule 80 seamless pipe offers exceptional strength and clarity. Engineered for challenging industrial settings, it withstands significant pressure and corrosive environments with superior impact resistance.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 2.2" |
| Outside Diameter | 4.126" |
| Wall Thickness | 0.383" |
Designed for demanding industrial environments, this Schedule 80 Polycarbonate seamless pipe boasts a 2.2-inch nominal pipe size with an actual outside diameter of 4.126 inches and a substantial wall thickness of 0.383 inches. Polycarbonate's inherent properties provide excellent impact strength, high tensile strength, and good chemical resistance to a wide range of substances, making it suitable for applications involving corrosive fluids, abrasive materials, or high-pressure systems where transparency is also a requirement for visual monitoring.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement and primer for polycarbonate pipes, following manufacturer's instructions. 3. Assemble pipe and fitting with a slight twisting motion, holding firmly for the recommended set time.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement not rated for polycarbonate. | Always use a solvent cement specifically formulated and recommended for polycarbonate piping systems to ensure a strong, leak-proof bond. |
| Insufficient curing time before pressurizing the system. | Allow adequate curing time as specified by the solvent cement manufacturer before introducing any pressure to the installed piping. |
A: This Seamless Pipe, Schedule 80 is manufactured from Polycarbonate.
A: Chemical processing lines, High-pressure fluid transfer, Sight glasses and visual monitoring systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||