This Schedule 80 polycarbonate seamless pipe offers exceptional clarity, impact strength, and chemical resistance. Its robust construction ensures reliable fluid handling and protection in demanding industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 1.4" |
| Outside Diameter | 4.258" |
| Wall Thickness | 0.413" |
Engineered for reliability and performance, this 1.4-inch nominal pipe size (NPS) Schedule 80 seamless pipe is manufactured from high-grade polycarbonate. It features a precise outside diameter of 4.258 inches and a substantial wall thickness of 0.413 inches, ensuring superior pressure rating and structural integrity. Polycarbonate's inherent properties include excellent optical clarity, high impact resistance even at low temperatures, and good resistance to a range of chemicals and solvents, making it suitable for visible fluid flow and abrasive media applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement to both the pipe end and fitting socket according to manufacturer guidelines. 3. Insert pipe into fitting with a slight twisting motion and hold firmly for the recommended set time. 4. Allow adequate cure time before introducing pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for polycarbonate. | Always use a solvent cement specifically formulated for polycarbonate to ensure proper fusion and prevent material degradation. |
| Over-tightening threaded connections. | Polycarbonate can be brittle under excessive stress. Tighten threaded fittings hand-tight plus a quarter turn, or as specified by the fitting manufacturer, to avoid cracking. |
A: This Seamless Pipe, Schedule 80 is manufactured from Polycarbonate.
A: Visible fluid transport systems, Chemical processing lines, High-impact conveying systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||