This Schedule 80 seamless polycarbonate pipe offers exceptional clarity, impact strength, and chemical resistance. Its robust construction ensures reliable fluid conveyance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 0.5" |
| Outside Diameter | 3.708" |
| Wall Thickness | 0.395" |
Engineered for reliability and performance, this 0.5" nominal size, Schedule 80 seamless polycarbonate pipe boasts an impressive 3.708" outside diameter and a substantial 0.395" wall thickness. Polycarbonate's inherent properties, including high tensile strength, excellent impact resistance even at low temperatures, and superior optical clarity, make it suitable for visual monitoring of fluid flow. Its wide operating temperature range and resistance to many common chemicals ensure longevity in challenging applications. Precisely manufactured to Schedule 80 dimensions, it guarantees compatibility with standard fittings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces of the pipe and fittings are clean and free of debris. 2. Apply appropriate solvent cement specifically designed for polycarbonate to both the pipe end and the fitting socket, following the cement manufacturer's instructions. 3. Insert the pipe into the fitting with a slight twisting motion until it bottoms out, holding firmly for the recommended set time. 4. Allow adequate cure time before subjecting the system to pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong solvent cement. | Always use a solvent cement specifically formulated for polycarbonate to ensure proper fusion and prevent material degradation. |
| Inadequate surface preparation. | Thoroughly clean and optionally 'dull' the pipe end and fitting socket with a clean cloth and primer (if recommended by cement manufacturer) to promote optimal bonding. |
| Insufficient holding time after assembly. | Adhere strictly to the solvent cement manufacturer's recommended set time and cure time before applying any pressure to the system to prevent joint failure. |
A: This Seamless Pipe, Schedule 80 is manufactured from Polycarbonate.
A: Visual fluid monitoring systems, Chemical processing equipment, High-impact protective shielding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||