This 5.6" OD, Schedule 40 seamless polycarbonate pipe offers exceptional impact resistance and clarity. Engineered for demanding industrial environments, it provides reliable fluid conveyance and protection.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 5.6" |
| Outside Diameter | 3.635" |
| Wall Thickness | 0.262" |
A proven choice for industrial professionals, this 5.6" OD, Schedule 40 seamless polycarbonate pipe features a 0.262" wall thickness, yielding an approximate 5.1" inside diameter. Polycarbonate's inherent high tensile strength and excellent impact resistance make it suitable for applications subjected to mechanical stress and potential damage. Its clarity allows for visual monitoring of flow. Ideal for conveying gases, low-pressure liquids, and as protective conduits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Use appropriate solvent cement and primer specifically designed for polycarbonate. 3. Apply cement evenly to both mating surfaces and join with a quarter-twist motion, holding firmly for 30 seconds.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement. | Always use a solvent cement formulated for polycarbonate to ensure proper fusion and prevent material degradation. |
| Insufficient curing time. | Allow adequate curing time as per the solvent cement manufacturer's instructions before subjecting the pipe to pressure or stress. |
A: This Seamless Pipe, Schedule 40 is manufactured from Polycarbonate.
A: Sight glasses and flow indicators, Protective conduits for sensitive instrumentation, Low-pressure fluid transfer systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||