Engineered for robust industrial applications, this 2.7" ID Schedule 40 seamless polycarbonate pipe offers exceptional clarity, impact strength, and chemical resistance for visual monitoring and fluid transfer.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 2.7" |
| Outside Diameter | 4.762" |
| Wall Thickness | 0.189" |
Designed for demanding industrial environments, this polycarbonate seamless pipe meets Schedule 40 dimensions with a 2.7" nominal pipe size, a precise 4.762" outside diameter, and a substantial 0.189" wall thickness. Its inherent polycarbonate properties provide superior impact resistance, high tensile strength, and excellent optical clarity, making it ideal for applications requiring visual inspection of flow or contents, or where protection from impact and corrosive substances is paramount. This material is also rated for a wide temperature range and exhibits good electrical insulation properties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. Cut pipe to length using a fine-tooth saw or pipe cutter. 2. Deburr both the inside and outside edges of the cut pipe ends. 3. Apply appropriate polycarbonate solvent cement evenly to both the pipe end and the fitting socket. Immediately insert the pipe into the fitting with a slight twist and hold for 30 seconds to ensure a strong bond.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard PVC cement on polycarbonate. | Always use a solvent cement specifically formulated for polycarbonate to ensure proper fusion and prevent material degradation. |
| Over-tightening threaded connections, leading to stress cracking. | Hand-tighten threaded fittings, then use a wrench for an additional quarter to half turn. Avoid excessive force. |
A: This Seamless Pipe, Schedule 40 is manufactured from Polycarbonate.
A: Visual flow monitoring systems, Chemical processing equipment, Pneumatic conveying systems, Protective fluid conduits.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||