This Schedule 40 seamless polycarbonate pipe offers exceptional clarity, impact strength, and chemical resistance for critical industrial fluid transfer and structural applications. Engineered for durability.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 0.9" |
| Outside Diameter | 4.318" |
| Wall Thickness | 0.341" |
A high-performance industrial component, this seamless polycarbonate pipe adheres to Schedule 40 dimensions, featuring an internal diameter of 0.9 inches and an outside diameter of 4.318 inches, with a substantial 0.341-inch wall thickness. Polycarbonate's inherent properties provide excellent optical clarity, superior impact resistance against physical shock, and good resistance to a range of chemicals, making it suitable for demanding environments where transparency and toughness are paramount. Its high tensile strength and rigidity ensure structural integrity in various applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement designed for polycarbonate to both pipe end and fitting socket. 3. Assemble with a quarter-turn twist, holding firmly for 30 seconds to allow initial bonding. 4. Allow adequate cure time per cement manufacturer's instructions before pressurizing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement not rated for polycarbonate. | Always use a solvent cement specifically formulated for polycarbonate to ensure proper fusion and leak-proof joints. |
| Inadequate cure time before system pressurization. | Adhere strictly to the solvent cement manufacturer's recommended cure times to prevent joint failure under pressure. |
A: This Seamless Pipe, Schedule 40 is manufactured from Polycarbonate.
A: Sight glasses and visual flow monitoring, Protective conduits for sensitive components, Low-pressure fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||