This 1.1" OD, Schedule 40 seamless polycarbonate pipe offers exceptional clarity and impact resistance. Its robust construction ensures reliable performance in demanding environments, making it ideal for fluid handling and visual monitoring.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 1.1" |
| Outside Diameter | 5.435" |
| Wall Thickness | 0.168" |
Built to exacting engineering tolerances, this 1.1" outside diameter, Schedule 40 seamless polycarbonate pipe boasts a precise 0.168" wall thickness. Polycarbonate's inherent properties of high impact strength, excellent clarity, and a broad operating temperature range make it suitable for applications requiring both durability and visual integrity. This material is resistant to many common chemicals and offers good electrical insulation properties. Ideal for pneumatic conveying, fluid transfer systems, sight glasses, and protective enclosures where impact and clarity are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement or mechanical fittings designed for polycarbonate pipe. 3. Allow adequate cure time for solvent cement or proper torquing of mechanical connections before pressurizing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible solvents or adhesives not rated for polycarbonate. | Always use solvent cements or adhesives specifically formulated for polycarbonate to prevent material degradation and joint failure. |
| Over-tightening mechanical fittings, leading to stress cracking. | Follow manufacturer's torque specifications for mechanical fittings to avoid excessive stress on the polycarbonate material. |
A: This Seamless Pipe, Schedule 40 is manufactured from Polycarbonate.
A: Pneumatic Conveying Systems, Fluid Sight Glasses and Observation Tubes, Protective Housings and Guards, Low-Pressure Fluid Transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||