Engineered for demanding environments, this M6 x 134mm hex head cap screw is constructed from high-performance polycarbonate. Offering superior chemical resistance and dielectric strength, it ensures reliable fastening in critical applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Size | M6 |
| Length | 134mm |
| Head Width | 28mm |
Specified by design engineers worldwide, this M6 x 134mm polycarbonate hex head cap screw features a robust M6 thread and an extended 134mm length for deep engagement. The substantial 28mm head width provides ample surface area for torque application, minimizing stress on mating components. Polycarbonate's inherent properties include excellent impact resistance, broad chemical inertness, and non-conductivity, making it suitable for environments where metal fasteners would corrode or interfere with electrical systems. Its lightweight nature further contributes to overall assembly efficiency and reduced load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the screw threads and the receiving hole to remove any debris. 2. Carefully thread the polycarbonate hex head cap screw into the receiving hole, ensuring proper alignment to prevent cross-threading. 3. Tighten the screw using an appropriately sized wrench or socket, applying consistent torque until secure. Avoid over-tightening to prevent damage to the polycarbonate material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M6 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M6 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the screw, leading to stripping of threads or cracking of the polycarbonate head. | Use a calibrated torque wrench and adhere to recommended torque specifications for polycarbonate fasteners to ensure a secure fit without damaging the material. |
| Using excessive force on the hex head, potentially causing damage or slippage. | Ensure the wrench or socket properly engages the hex head and apply steady, controlled pressure during tightening. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Electrical enclosures and control panels, Medical equipment and devices, Food processing and pharmaceutical machinery, Corrosive chemical environments, Lightweight assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||