This 0.594-inch thick polycarbonate stock sheet offers exceptional wear resistance and low friction for critical lubricating components. Its robust composition ensures longevity in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.594" |
| Length | 17" |
| Width | 25" |
Trusted by engineers across multiple sectors, this 0.594" thick, 17" x 25" polycarbonate stock sheet is engineered for superior performance in lubricating applications. Its inherent lubricity, combined with exceptional impact strength and a broad operating temperature range, makes it ideal for manufacturing low-friction bearings, wear pads, and guide rails. The material's excellent machinability allows for precise fabrication of complex geometries, ensuring a perfect fit and optimal functionality in high-stress environments where reduced friction and extended component life are paramount. Complies with industry standards for material integrity and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly to remove any debris or contaminants. 2. Precisely cut the polycarbonate sheet to the required dimensions using appropriate cutting tools for polycarbonate. 3. Securely fasten the fabricated component into its intended assembly, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polycarbonate, leading to chipping or cracking. | Utilize sharp, carbide-tipped blades specifically designed for cutting plastics like polycarbonate, ensuring a clean and precise cut. |
| Improperly stressing the material during installation, causing premature failure. | Ensure the component is installed with even pressure and without undue stress points, allowing for thermal expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction bearings, Wear pads and strips, Guide rails and chutes, Sealing components in lubricated systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||