This premium polycarbonate stock sheet offers exceptional wear resistance and inherent low friction. Its robust construction and precise dimensions make it ideal for high-stress sliding components and dynamic assemblies.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.879" |
| Length | 32" |
| Width | 34" |
Built to exacting engineering tolerances, this 0.879-inch thick polycarbonate sheet (32" x 34") is formulated with integrated solid lubricants for reduced friction and extended service life. It exhibits excellent impact strength, chemical resistance, and a broad operating temperature range, making it suitable for high-load bearing surfaces, wear strips, and guide rails in automated machinery, material handling systems, and processing equipment where traditional lubrication methods are impractical or undesirable.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, dry, and free from debris. 2. Precisely cut the polycarbonate sheet to the required dimensions using appropriate cutting tools for plastics. 3. Securely fasten the sheet using mechanical fasteners, ensuring even pressure distribution and avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate instead of the lubricated grade for wear applications. | Always specify and use the integrated lubricated polycarbonate grade for components requiring reduced friction and enhanced wear resistance. |
| Improper fastening, leading to localized stress concentrations and premature failure. | Utilize appropriately sized fasteners and a calculated hole pattern to distribute load evenly across the sheet, preventing stress risers. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Wear strips and guide rails in automated assembly lines, Low-friction sliding components in material handling equipment, Bearing surfaces for high-load, low-speed applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||