This high-impact polycarbonate stock sheet is engineered with inherent lubricating properties, offering superior wear resistance and reduced friction for demanding industrial environments. Its robust nature ensures durability and performance.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.284" |
| Length | 22" |
| Width | 25" |
Specified by design engineers worldwide, this 0.284-inch thick polycarbonate stock sheet, measuring 22 inches by 25 inches, exhibits exceptional impact strength and a low coefficient of friction. Its inherent lubricity makes it ideal for components requiring reduced wear and smooth operation, such as bearings, slides, and guide rails. The material's excellent dimensional stability and resistance to chemicals further enhance its suitability for critical industrial applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Position the polycarbonate sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate where low-friction is critical. | Select this specifically engineered lubricating polycarbonate stock sheet for applications demanding reduced wear and friction. |
| Overtightening fasteners, leading to stress fractures. | Use appropriate torque settings during installation and consider pre-drilling holes slightly larger than the fastener shank. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction bearing surfaces, Wear strips and guides, Protective shielding in high-abrasion areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||