This polycarbonate stock sheet is specifically formulated for lubricating applications, offering exceptional wear resistance and a low coefficient of friction. Its robust construction ensures reliable performance in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.294" |
| Length | 40" |
| Width | 41" |
Purpose-built for heavy-duty applications, this polycarbonate stock sheet boasts a precise thickness of 0.294 inches, a length of 40 inches, and a width of 41 inches. Engineered with inherent self-lubricating properties, it minimizes friction and wear, making it ideal for high-load sliding mechanisms, wear strips, and conveyor components. The material's excellent impact strength and chemical resistance further enhance its suitability for harsh operational conditions, ensuring extended service life and reduced maintenance requirements in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mounting surface thoroughly to remove all debris and contaminants. 2. Position the polycarbonate sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that can stress the polycarbonate. | Utilize fasteners with washers or pilot holes to prevent stress concentration and potential cracking. |
| Exposing the sheet to excessive heat during installation. | Avoid direct heat sources and ensure proper ventilation if any heat is required for shaping or forming. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Low-friction wear strips, Conveyor guide rails, Sliding bearing surfaces, Chute liners, Impact pads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||