Engineered for superior performance in corrosive and electrically sensitive industrial settings, this M12 x 94mm polycarbonate hex head cap screw offers exceptional strength and durability. Its lightweight, impact-resistant nature makes it ideal for demanding applications where traditional metal fasteners fall short.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Size | M12 |
| Length | 94mm |
| Head Width | 20mm |
Designed for demanding industrial environments, this M12 x 94mm hex head cap screw is manufactured from high-performance polycarbonate. This material provides excellent chemical resistance to a wide range of solvents, acids, and bases, making it suitable for wet or chemically aggressive conditions. Its inherent electrical insulating properties prevent current conductivity, safeguarding sensitive electronic equipment. With a head width of 20mm, it offers a substantial bearing surface for secure fastening. The M12 thread pitch ensures compatibility with standard metric hardware, while the 94mm length provides ample engagement for robust assembly. Ideal for applications requiring a lightweight, non-conductive, and corrosion-proof fastener.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating threads are clean and free of debris. 2. Thread the polycarbonate hex head cap screw into the designated receiving hole, applying consistent rotational force. 3. Tighten to the recommended torque specification, avoiding over-tightening to prevent material deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M12 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M12 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening the polycarbonate screw. | Use a torque wrench and adhere to the manufacturer's recommended torque limits for polycarbonate fasteners to prevent stripping or cracking. |
| Using in applications with extreme temperature fluctuations beyond polycarbonate's rated range. | Verify the operating temperature range of polycarbonate and select an alternative material if the application exceeds these limits. |
A: This Hex Head Cap Screw, Polycarbonate is manufactured from Polycarbonate.
A: Chemical processing equipment assembly, Electrical enclosure and control panel fastening, Food and beverage processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||