This high-clarity polycarbonate sheet is engineered for superior filtering applications. Its robust material properties ensure durability and consistent performance in challenging industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.175" |
| Length | 33" |
| Width | 21" |
Trusted by engineers across multiple sectors, this 0.175" thick, 33" x 21" polycarbonate stock sheet is manufactured to exacting standards for filtration media support. Its inherent optical clarity, coupled with exceptional impact strength and a broad operating temperature range (-40°F to 270°F), makes it ideal for diverse fluid and air filtration systems. The material's resistance to a wide array of chemicals and UV radiation ensures longevity and reliability in continuous operation, reducing maintenance cycles and downtime.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully position the polycarbonate sheet, aligning with pre-drilled holes or designated mounting points. 3. Secure the sheet using appropriate fasteners, avoiding overtightening to prevent stress fractures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without proper washers. | Utilize flat washers to distribute pressure evenly and prevent localized stress on the polycarbonate. |
| Drilling holes too close to the edge. | Maintain a minimum edge distance of 1.5 times the hole diameter to prevent cracking during installation or operation. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective shielding for filtration equipment, Support structures for filter media, Optical components in sensing systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||