This high-performance 0.983" thick polycarbonate sheet is engineered for demanding electrical and lighting applications. Offering exceptional impact resistance and optical clarity, it meets rigorous industry standards for safety and durability.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.983" |
| Length | 45" |
| Width | 48" |
Built to exacting engineering tolerances, this 0.983-inch thick polycarbonate stock sheet measures 45 inches by 48 inches. Its inherent excellent dielectric strength and flame retardant properties make it ideal for electrical enclosures, light diffusers, and protective shielding. Polycarbonate's superior impact resistance, significantly outperforming glass and acrylic, ensures long-term reliability in high-stress environments, while its broad temperature range and UV stability maintain performance over time.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled mounting holes or desired fit. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid stress points. Avoid overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are too sharp and can initiate cracks. | Utilize blunt-ended or rounded screws, and consider using washers to spread the load. |
| Drilling holes too close to the edge, compromising structural integrity. | Maintain a minimum edge distance of at least two times the hole diameter for robust mounting. |
| Exposing the polycarbonate to harsh chemicals that can cause crazing or degradation. | Consult the material compatibility chart for approved cleaning agents and solvents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Electrical Enclosures & Housings, Machine Guarding for Lighting Fixtures, Light Diffuser Panels, Protective Shields for Electrical Components, Insulating Barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||