This polycarbonate deep groove ball bearing offers a lightweight, corrosion-resistant solution for power transmission. Its unique material properties make it suitable for specialized industrial applications where traditional metal bearings may fail.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 96mm |
| Outside Diameter | 28mm |
| Width | 10mm |
A high-performance industrial component, this deep groove ball bearing features an internal diameter of 96mm, an external diameter of 28mm, and a width of 10mm. Constructed from advanced polycarbonate, it exhibits excellent chemical resistance to a wide range of solvents and corrosive agents, making it ideal for environments where metal bearings would degrade. Its inherently low coefficient of friction contributes to smooth operation and reduced energy loss. The polycarbonate material also provides electrical insulation properties and a lighter weight profile compared to steel bearings, facilitating handling and reducing structural load in sensitive equipment. It is designed for moderate load conditions and rotational speeds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing into the housing, ensuring even pressure is applied to the outer ring. 3. Gently slide the shaft through the inner ring of the bearing, maintaining alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation | Use a bearing press or appropriate tools to apply even pressure to the correct ring (outer for housing, inner for shaft) to prevent damage. |
| Insufficient lubrication for the application | Consult the material datasheet for recommended lubricant types and reapplication intervals based on operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Food and beverage processing equipment, Medical device components, Chemical handling systems, Light-duty conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||