This deep groove ball bearing, constructed from high-performance polycarbonate, offers excellent corrosion resistance and reduced weight. Its precise dimensions ensure reliable performance in demanding industrial applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 95mm |
| Outside Diameter | 188mm |
| Width | 21mm |
A proven choice for industrial professionals, this deep groove ball bearing boasts an inside diameter of 95mm, an outside diameter of 188mm, and a width of 21mm. The robust polycarbonate material provides exceptional chemical inertness, making it suitable for environments where traditional steel bearings would degrade. Its lower friction coefficient and lighter mass contribute to energy efficiency and ease of handling. This bearing is engineered for moderate radial loads and light axial loads, ensuring smooth operation in diverse power transmission systems and machinery where non-conductivity or resistance to specific chemicals is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully press the bearing into the housing, applying even pressure to the outer ring. 3. Verify the bearing rotates freely and without excessive play.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the inner ring during press-fitting into a housing. | Always apply mounting pressure to the ring that is being fitted into its mating component (outer ring to housing, inner ring to shaft). |
| Improper lubrication leading to premature wear. | Consult the bearing manufacturer's specifications for appropriate lubricant type and re-lubrication intervals. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Corrosive chemical processing equipment, Food and beverage machinery, Light-duty conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||