This deep groove ball bearing, constructed from advanced polycarbonate, offers exceptional corrosion resistance and lightweight design. Its precise dimensions ensure smooth, reliable operation in power transmission systems.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 95mm |
| Outside Diameter | 171mm |
| Width | 23mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 95mm, an outside diameter of 171mm, and a width of 23mm. The robust polycarbonate material provides superior chemical inertness and resistance to environmental degradation, making it an excellent choice for applications where traditional steel bearings may fail. Its low coefficient of friction ensures efficient power transfer and extended service life. Designed for optimal performance in moderate load conditions and environments prone to moisture or corrosive substances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully align the bearing with the shaft and housing. 3. Apply appropriate axial and radial load according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to premature wear. | Apply torque according to manufacturer's recommended specifications or use a torque wrench. |
| Improper shaft or housing fit, causing misalignment and vibration. | Verify shaft and housing dimensions to ensure a proper interference or clearance fit as per design. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Corrosive Chemical Processing Equipment, Food and Beverage Machinery, Water Treatment Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||