Engineered for reliable power transmission, this polycarbonate deep groove ball bearing offers a unique combination of lightweight design and excellent corrosion resistance, making it a superior alternative in demanding environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 93mm |
| Outside Diameter | 85mm |
| Width | 11mm |
A proven choice for industrial professionals, this deep groove ball bearing boasts an inside diameter of 93mm and an outside diameter of 85mm, with a width of 11mm. Constructed from high-performance polycarbonate, it provides exceptional chemical inertness and resistance to environmental factors, outperforming traditional steel bearings in corrosive or wash-down applications. Its inherent lubricity reduces friction and wear, contributing to extended operational life and reduced maintenance requirements. Ideal for light-duty power transmission systems where weight and corrosion are critical concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, ensuring even pressure is applied to the inner ring. 3. Secure the bearing in the housing, again using even pressure on the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring when mounting onto the shaft. | Always apply force to the inner ring when mounting onto the shaft and to the outer ring when mounting into the housing to prevent damage to the bearing raceways. |
| Improper shaft or housing fit leading to brinelling. | Verify that the shaft and housing dimensions are within the recommended tolerances for the bearing to ensure a proper press fit and prevent brinelling. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Material Handling Systems, Food and Beverage Processing, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||