This deep groove ball bearing, crafted from advanced polycarbonate, offers exceptional corrosion resistance and a lightweight profile. Ideal for power transmission in environments where traditional steel bearings falter, ensuring reliable operation and extended service life.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 91mm |
| Outside Diameter | 147mm |
| Width | 46mm |
Manufactured under strict quality controls, this polycarbonate deep groove ball bearing features an inside diameter of 91mm, an outside diameter of 147mm, and a width of 46mm. The polymer construction provides superior resistance to chemicals, moisture, and electrochemical degradation, making it suitable for applications in corrosive or wet environments. Its inherent lightweight properties also contribute to reduced system inertia. This bearing is designed for moderate load conditions and offers smooth, low-friction operation, ideal for applications requiring non-magnetic or electrically insulating properties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the housing bore and shaft are clean and free of debris. Verify dimensions against specifications. 2. Carefully align the bearing with the shaft and housing, applying even, axial pressure for insertion into the shaft. A press or bearing heater may be utilized for precise fitting. 3. Gently press the bearing into the housing, ensuring it is seated squarely and without tilting. Avoid applying excessive force directly to the outer ring if pressing into the housing first.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during installation. | Always apply mounting force to the ring that is being press-fitted. For shaft mounting, force should be applied to the inner ring; for housing mounting, force should be applied to the outer ring. |
| Using excessive heat during mounting. | If using a bearing heater, ensure the temperature does not exceed the material's thermal limits (refer to manufacturer data) to prevent degradation of the polycarbonate. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Chemical Handling Systems, Medical Devices, Water Treatment Plants.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||