This deep groove ball bearing, constructed from durable polycarbonate, offers exceptional corrosion resistance and a lightweight design for demanding power transmission applications. Engineered for smooth rotational performance.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 85mm |
| Outside Diameter | 103mm |
| Width | 32mm |
Manufactured under strict quality controls, this polycarbonate deep groove ball bearing features an inside diameter of 85mm, an outside diameter of 103mm, and a width of 32mm. The advanced polycarbonate material provides excellent chemical resistance, non-conductivity, and a significantly lower weight compared to traditional steel bearings, making it ideal for corrosive environments or weight-sensitive machinery. Its robust construction ensures reliable operation in moderate load conditions, offering a cost-effective solution for various industrial power transmission systems where lubrication requirements are minimal or specific dielectric properties are needed.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press the bearing into its housing, applying even pressure to the outer ring. 3. Verify smooth rotation after installation to confirm proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the inner ring during press-fitting into the shaft. | Always apply press-fitting force to the outer ring when mounting the bearing in its housing and to the inner ring when mounting on the shaft to avoid damaging the bearing elements. |
| Improper lubrication for the specific operating environment. | While polycarbonate bearings are often chosen for reduced lubrication needs, consult the manufacturer's recommendations for optimal lubricant selection based on speed, load, and environmental factors to maximize lifespan. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Corrosive chemical processing equipment, Food and beverage machinery, Medical device components, Light-duty conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||