This deep groove ball bearing features a robust polycarbonate construction, offering a lightweight and corrosion-resistant solution for power transmission. Its precision engineering ensures reliable performance in demanding environments.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 75mm |
| Outside Diameter | 86mm |
| Width | 28mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing boasts an inside diameter of 75mm, an outside diameter of 86mm, and a width of 28mm. Constructed from high-grade polycarbonate, it exhibits excellent chemical resistance, low friction, and a significantly reduced weight compared to traditional steel bearings. These properties make it an ideal choice for applications where electrical insulation, non-magnetic behavior, or resistance to corrosive media is paramount, such as in food processing machinery, chemical handling equipment, and sensitive electronic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing surfaces are clean and free from debris. 2. Carefully align the bearing with the shaft and gently press it into place, using a suitable bearing installer if necessary. 3. Mount the outer ring into the housing, ensuring a snug and even fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, potentially damaging the polycarbonate structure. | Use a bearing press or a soft mallet with controlled, even pressure. Avoid hammering directly onto the bearing rings. |
| Incorrect shaft or housing tolerances leading to premature wear or seizure. | Verify that the shaft and housing dimensions meet the specified tolerances for this bearing size. Consult engineering drawings for accurate fitment. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Chemical Processing Machinery, Medical Devices and Equipment, Conveyor Systems in Corrosive Environments, Electrical Insulation Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||