This high-performance deep groove ball bearing, constructed from durable polycarbonate, offers exceptional corrosion resistance and lightweight operation. Ideal for applications where traditional steel bearings are unsuitable.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 75mm |
| Outside Diameter | 193mm |
| Width | 14mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 75mm, an outside diameter of 193mm, and a width of 14mm. The inherent properties of polycarbonate provide excellent resistance to many chemicals, corrosive agents, and moisture, making it a superior choice for food processing, chemical handling, and medical equipment. Its non-magnetic nature also suits specific electronic or sensor-based applications. Operating temperature range is critical for polycarbonate, typically between -20°C and +120°C, depending on load and environmental factors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully align the bearing with the shaft and housing, avoiding excessive force. 3. Secure the bearing using appropriate retaining methods, such as circlips or press fits, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening during press-fit installation. | Apply slow, even pressure during press-fit. If resistance is high, re-evaluate shaft/housing tolerances or consider alternative mounting methods. |
| Exposing the bearing to chemicals outside its compatibility range. | Consult the chemical compatibility chart for polycarbonate before installation. Avoid prolonged exposure to strong acids, bases, or certain solvents. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Food and beverage processing machinery, Chemical processing equipment, Medical device components, Marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||