This polycarbonate deep groove ball bearing offers exceptional lightweight performance and corrosion resistance. Its robust design ensures reliable operation in diverse industrial environments, making it ideal for power transmission systems requiring durability and reduced weight.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 18mm |
| Outside Diameter | 43mm |
| Width | 11mm |
A proven choice for industrial professionals, this deep groove ball bearing features a precise 18mm inside diameter, a 43mm outside diameter, and a 11mm width. Constructed from high-performance polycarbonate, it exhibits excellent chemical inertness, low friction, and superior electrical insulation properties, making it suitable for environments where traditional steel bearings might corrode or cause electrical interference. Its lightweight nature contributes to reduced system inertia and energy consumption, ideal for high-speed rotational applications and sensitive equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat is clean and free from debris. 2. Gently press the bearing into its designated housing, ensuring it is seated squarely. 3. Verify smooth rotation after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing into the housing with excessive force. | Use a bearing press or appropriate jig to apply even pressure, or lightly tap with a soft mallet on the outer ring if necessary. |
| Installing the bearing into a dirty or damaged housing. | Thoroughly clean the housing and inspect for any burrs or damage before installation. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Lightweight machinery components, Corrosive fluid handling systems, Electrical equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||