This advanced deep groove ball bearing, constructed from high-grade polycarbonate, offers superior corrosion resistance and lightweight performance for specialized power transmission applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 64mm |
| Outside Diameter | 65mm |
| Width | 27mm |
Built to exacting engineering tolerances, this polycarbonate deep groove ball bearing features an inside diameter of 64mm, an outside diameter of 65mm, and a width of 27mm. The inherent chemical inertness and low friction coefficient of polycarbonate make it exceptionally well-suited for environments where traditional steel bearings would degrade, such as in food processing, chemical handling, or water treatment systems. Its non-conductive properties also lend themselves to applications requiring electrical isolation. While offering excellent corrosion resistance and reduced weight, it is designed for lower load capacities and moderate rotational speeds compared to metallic bearings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing mating surfaces are clean and free from debris. 2. Gently press the bearing onto the shaft, ensuring it is seated squarely. 3. Secure the bearing in the housing, applying even pressure to avoid distortion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, which can crack the polycarbonate housing. | Use a bearing press or a soft mallet with appropriate adapter to apply force evenly. Avoid hammering directly on the bearing. |
| Exceeding the load or speed limitations of polycarbonate bearings, leading to premature failure. | Consult the technical specifications and ensure the application's operating conditions are within the recommended parameters for polycarbonate bearings. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Chemical Metering Pumps, Water Treatment Systems, Medical Devices, Corrosive Environment Conveyors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||