Engineered for robust performance, this deep groove ball bearing features a lightweight yet strong polycarbonate construction. It offers excellent corrosion resistance and smooth operation, making it ideal for various power transmission applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 62mm |
| Outside Diameter | 72mm |
| Width | 31mm |
A high-performance industrial component, this deep groove ball bearing is precisely manufactured with an inside diameter of 62mm, an outside diameter of 72mm, and a width of 31mm. Constructed from advanced polycarbonate, it exhibits superior chemical resistance and a significantly lower weight compared to traditional steel bearings, while still providing excellent load-bearing capacity for its class. The material's inherent dielectric properties also make it suitable for applications where electrical insulation is a concern. This design ensures reliable and efficient operation in moderate to high-speed power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully align the bearing with the shaft and housing, applying gentle, even pressure. 3. Use appropriate bearing installation tools to press the bearing into place, avoiding excessive force or impact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying direct impact force during installation. | Always use a bearing press or a soft hammer with a bearing driver to apply even pressure. |
| Installing a dirty bearing. | Inspect and clean the bearing and its mating surfaces before installation to prevent premature wear and failure. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Conveyor Systems, Electric Motors, Material Handling Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||