Engineered for robust performance in challenging conditions, this deep groove ball bearing features a durable polycarbonate construction. Its precise dimensions ensure reliable operation in a variety of power transmission systems.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 61mm |
| Outside Diameter | 26mm |
| Width | 25mm |
Designed for demanding industrial environments, this deep groove ball bearing boasts an inside diameter of 61mm, an outside diameter of 26mm, and a width of 25mm. Constructed from high-grade polycarbonate, it offers exceptional resistance to many chemicals, solvents, and corrosive agents, making it suitable for applications where traditional steel bearings would degrade. The lightweight nature of polycarbonate also contributes to reduced inertial loads. Its robust design ensures smooth, low-friction rotation, providing efficient power transmission in a wide range of mechanical assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating shaft and housing surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely and fully. 3. Mount the assembly into the housing, applying even pressure to avoid distorting the bearing races.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to race deformation. | Utilize a calibrated bearing press or appropriate driver tool to apply force only to the ring being fitted (inner ring on shaft, outer ring in housing). |
| Improper alignment of the bearing with the shaft or housing. | Verify alignment before applying pressure; ensure the bearing is perpendicular to the shaft and the housing bore. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Corrosive Chemical Processing Equipment, Food and Beverage Machinery, Medical Device Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||