This polycarbonate deep groove ball bearing offers a lightweight, non-conductive, and corrosion-resistant solution for power transmission. Its robust design ensures reliable performance in environments where traditional metal bearings may fail.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 60mm |
| Outside Diameter | 20mm |
| Width | 13mm |
A proven choice for industrial professionals, this deep groove ball bearing features an inside diameter of 60mm, an outside diameter of 20mm, and a width of 13mm. Constructed from high-performance polycarbonate, it offers excellent chemical resistance and a lower coefficient of friction compared to steel, making it ideal for corrosive environments, food processing, and applications requiring electrical insulation. The bearing's lightweight nature reduces overall system mass, contributing to energy efficiency. Its precise manufacturing ensures smooth operation and extended service life under moderate load conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly. 2. Gently press the bearing into the housing, ensuring it is seated evenly. 3. If pressing onto the shaft, use a suitable arbor press or sleeve, applying force only to the inner ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring when mounting onto a shaft. | Always apply mounting force to the inner ring when installing on a shaft to prevent brinelling and damage to the raceways. |
| Contamination during installation. | Ensure a clean working environment and use clean tools to prevent debris from entering the bearing. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Food and Beverage Processing Equipment, Chemical Handling Systems, Medical Devices, Corrosive Environment Conveyors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||