This polycarbonate deep groove ball bearing offers exceptional corrosion resistance and a lightweight design. Engineered for reliable power transmission in challenging environments, it ensures smooth operation and extended service life.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 56mm |
| Outside Diameter | 88mm |
| Width | 43mm |
A proven choice for industrial professionals, this deep groove ball bearing features an inside diameter of 56mm, an outside diameter of 88mm, and a width of 43mm. Constructed from high-performance polycarbonate, it exhibits superior chemical inertness, excellent electrical insulation properties, and a significantly lower density compared to traditional steel bearings. This material composition makes it ideal for applications where corrosion, moisture, or electrical conductivity are concerns. Its robust design ensures efficient load distribution and minimal friction, contributing to optimized power transmission efficiency in demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surfaces are clean and free from debris. Verify shaft and housing dimensions against bearing specifications. 2. Carefully press or slide the bearing onto the shaft, applying even pressure to the inner ring. Avoid hammering directly on the bearing. 3. Once seated on the shaft, install the bearing into the housing, ensuring a snug fit without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force or impact during installation, potentially damaging the bearing raceways or cage. | Use proper press-fit tools or a controlled sliding motion. Apply force only to the component being mounted (inner ring on shaft, outer ring in housing). |
| Contaminating the bearing during handling or installation, leading to premature wear. | Handle bearings in a clean environment and avoid direct contact with bare hands. Keep packaging sealed until ready for installation. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Conveyor Systems, Food Processing Equipment, Chemical Handling Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||