This deep groove ball bearing, constructed from robust polycarbonate, offers exceptional performance in power transmission systems. Its precise dimensions ensure smooth operation and reduced friction in a wide array of industrial applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 56mm |
| Outside Diameter | 44mm |
| Width | 37mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 56mm, an outside diameter of 44mm, and a width of 37mm. The advanced polycarbonate material offers excellent chemical resistance, low friction, and high impact strength, making it ideal for environments where traditional steel bearings may degrade or corrode. Its design allows for high radial and axial loads, providing reliable performance in demanding operational conditions. The material's inherent lightweight properties also contribute to reduced rotational inertia.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even pressure. 3. Gently seat the bearing into its housing, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto an improperly cleaned shaft. | Thoroughly clean both the shaft and housing surfaces before attempting installation. |
| Applying uneven pressure during press-fitting, causing misalignment. | Use a proper bearing installation tool or hydraulic press to apply even force. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Conveyor systems, Electric motors, Agricultural machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||