This advanced deep groove ball bearing, constructed from high-grade polycarbonate, offers superior performance in power transmission applications. Its robust design ensures reliable operation even under challenging conditions.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 50mm |
| Outside Diameter | 195mm |
| Width | 30mm |
Designed for demanding industrial environments, this polycarbonate deep groove ball bearing features an Inside Diameter of 50mm, an Outside Diameter of 195mm, and a Width of 30mm. The advanced polycarbonate material offers exceptional corrosion resistance, a high strength-to-weight ratio, and excellent electrical insulation properties, making it ideal for applications where traditional steel bearings may fail due to environmental factors. Its precise dimensions ensure smooth, low-friction rotation, minimizing energy loss and extending service life in power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Mount the assembly into the housing, applying even pressure to avoid misalignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation of the bearing races. | Utilize a bearing press or a carefully controlled hammer strike with a soft-faced hammer on the bearing's outer ring for shaft mounting and inner ring for housing mounting. |
| Incorrect shaft or housing bore tolerance, resulting in a loose or excessively tight fit. | Verify shaft and housing bore dimensions against the bearing's specifications and consult bearing fitting charts for recommended tolerances. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Conveyor Systems, Material Handling Equipment, Automated Manufacturing Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||