Engineered for optimal performance in power transmission systems, this polycarbonate deep groove ball bearing offers exceptional durability and lightweight design. Its precise dimensions ensure seamless integration and reliable operation.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 43mm |
| Outside Diameter | 75mm |
| Width | 27mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 43mm, an outside diameter of 75mm, and a width of 27mm. Constructed from high-grade polycarbonate, it exhibits excellent corrosion resistance, low friction, and superior electrical insulation properties. This material choice makes it ideal for environments where traditional steel bearings may degrade or interfere with sensitive electronic components. Its robust design ensures long-term operational integrity in demanding power transmission roles.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free from debris. 2. Carefully press the bearing into its housing, applying even pressure to avoid tilting. 3. Verify smooth rotation after installation to confirm proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive or uneven force during installation, leading to race deformation. | Use a proper bearing press or arbor press with appropriate tooling to apply even force to the outer race during insertion into the housing. |
| Incorrect shaft diameter, causing the bearing to be too loose or too tight. | Verify the shaft diameter matches the bearing's inside diameter specification and consider appropriate press-fit tolerances. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Electric motors and generators, Conveyor systems, Automated machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||