This advanced deep groove ball bearing features a robust polycarbonate construction, offering exceptional corrosion resistance and reduced weight for efficient power transmission in diverse industrial settings.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 44mm |
| Outside Diameter | 146mm |
| Width | 14mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts a precise Inside Diameter of 44mm, an Outside Diameter of 146mm, and a Width of 14mm. The advanced polycarbonate material provides excellent chemical inertness, superior electrical insulation properties, and a significantly lower density compared to traditional steel bearings. This makes it an ideal choice for applications where weight reduction, non-conductivity, or resistance to corrosive environments is critical. Its design ensures smooth rotational performance and reliable load bearing capacity within its operational parameters.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully align the bearing with the shaft and housing, applying even pressure. 3. Secure the bearing using appropriate retaining rings or housing fasteners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening retaining fasteners, causing housing distortion. | Apply torque according to manufacturer specifications for retaining rings or fasteners to prevent deformation of the bearing housing. |
| Applying excessive force during shaft mounting, leading to brinelling. | Use a bearing press or appropriate shaft mounting tools to apply force only to the inner ring of the bearing during installation. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Food processing equipment, Medical devices, Chemical processing machinery, Lightweight robotic arms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||