This advanced deep groove ball bearing features a durable polycarbonate construction, offering excellent corrosion resistance and non-conductive properties for specialized power transmission applications. Engineered for reliable performance.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 34mm |
| Outside Diameter | 106mm |
| Width | 37mm |
Built to exacting engineering tolerances, this polycarbonate deep groove ball bearing boasts an inside diameter of 34mm, an outside diameter of 106mm, and a width of 37mm. The polymer construction provides significant advantages over traditional steel bearings, including inherent electrical insulation, resistance to a wide range of chemicals and moisture, and a lighter weight profile. These characteristics make it ideal for environments where conductivity is a concern or where corrosive substances are present, ensuring longevity and consistent operational efficiency in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the shaft and the bearing housing thoroughly to remove any debris or contaminants. 2. Apply a light, even coating of appropriate lubricant to the bearing bore and the shaft mating surface. 3. Carefully press the bearing onto the shaft, ensuring it seats squarely and without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a dirty shaft or housing. | Always ensure both the shaft and housing are meticulously cleaned before installation to prevent damage and ensure smooth seating. |
| Using excessive force during press-fitting, especially on the outer ring. | Apply force evenly and squarely, primarily on the inner ring when mounting on the shaft, to avoid deforming the bearing races. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Corrosive chemical processing equipment, Electrically isolated rotating machinery, Food and beverage processing conveyors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||