This robust polycarbonate deep groove ball bearing offers exceptional performance in power transmission systems. Its lightweight design and superior corrosion resistance make it a reliable choice for challenging environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 43mm |
| Outside Diameter | 97mm |
| Width | 28mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts an inside diameter of 43mm, an outside diameter of 97mm, and a width of 28mm. Constructed from high-grade polycarbonate, it provides excellent chemical resistance, electrical insulation, and a significantly lower weight compared to traditional steel bearings. This material choice ensures reduced inertia and noise, making it ideal for applications requiring high-speed operation and resistance to corrosive media. Its robust construction guarantees extended service life and reliable torque transmission.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press or lightly tap the bearing onto the shaft, applying even pressure to the inner ring. 3. Mount the assembly into the housing, again ensuring even pressure on the outer ring, to avoid misalignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when pressing onto the shaft. | Always apply force to the inner ring when installing onto the shaft and to the outer ring when installing into the housing to prevent brinelling and misalignment. |
| Improper lubrication leading to premature wear. | Refer to the lubrication recommendations for polycarbonate bearings, typically light greases or dry lubricants, ensuring adequate coverage without over-application. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: High-speed rotating machinery, Corrosive chemical processing equipment, Lightweight robotic arms and automation systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||