This robust deep groove ball bearing, constructed from high-performance polycarbonate, offers exceptional durability and lightweight design. Its precise dimensions ensure smooth, low-friction operation for a variety of power transmission needs.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 43mm |
| Outside Diameter | 50mm |
| Width | 19mm |
Built to exacting engineering tolerances, this polycarbonate deep groove ball bearing features an inside diameter of 43mm, an outside diameter of 50mm, and a width of 19mm. The inherent properties of polycarbonate provide excellent corrosion resistance, electrical insulation, and a significant weight reduction compared to traditional steel bearings, making it ideal for applications where chemical exposure, conductivity, or weight is a critical factor. Its design is optimized for moderate radial loads and high rotational speeds, delivering reliable performance in environments where hygiene or non-magnetic properties are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free from debris. 2. Carefully align the bearing with the shaft and housing, avoiding excessive force. 3. Press the bearing into place using a suitable bearing installer or press, applying even pressure to the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the inner ring during installation. | Always apply installation force to the outer ring to avoid deforming the inner ring and damaging the bearing. |
| Over-tightening fasteners, causing housing distortion. | Tighten mounting screws incrementally and evenly to prevent distorting the bearing housing, which can lead to premature failure. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Lightweight industrial machinery, Food processing equipment, Medical devices, Corrosive chemical environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||