This polycarbonate deep groove ball bearing offers exceptional performance in power transmission applications. Its advanced material composition provides durability, corrosion resistance, and lightweight operation for critical rotating assemblies.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 43mm |
| Outside Diameter | 153mm |
| Width | 33mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an internal diameter of 43mm, an external diameter of 153mm, and a width of 33mm. Constructed from high-grade polycarbonate, it exhibits excellent chemical inertness, low friction coefficient, and superior electrical insulation properties. This makes it ideal for environments where traditional steel bearings may corrode or degrade. Its lightweight nature contributes to reduced inertia and overall system efficiency, particularly in high-speed rotational applications within the power transmission sector.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting housing and shaft surfaces are clean and free from debris. 2. Carefully align the bearing with the shaft and housing, applying even pressure for insertion. 3. Once seated, secure the bearing using appropriate retaining rings or press fits as per system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto a dirty or misaligned shaft. | Thoroughly clean shaft and housing surfaces and ensure precise alignment before attempting installation. Use a bearing installer tool for even pressure distribution. |
| Applying excessive or uneven force during installation. | Utilize a bearing press or a calibrated hammer with a suitable driver to apply force only to the inner ring during shaft mounting, and only to the outer ring during housing mounting. |
A: This Deep Groove Ball Bearing is manufactured from Polycarbonate.
A: Automated manufacturing equipment, Conveyor systems, Electric motors and generators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||